I also tried a PCI passthrough to a VM with Windows installed on it, but when I do, it stays stuck at boot.ĭo any of you have any experience with the Dell PERC H310 card and Xenserver 7? How did you get the card to work? It's on the HCL list so I expected it just to appear but it just doesn't. I see the PCI card but not the drive I created. ![]() I also tried to install the Red Hat drivers but still not luck. using rufus.ie Copy the flash tools and required firmware onto the stick. I've been searching for any Xenserver drivers but I cannot find any. The procedure is more or less always the same, and looks something like this: Create a bootable DOS-USB-Stick, i.e. iDRAC/racadm I have a T320 with iDRAC Enterprise and a RAID-1 array on a PERC H310. ![]() If I put the installation on an SSD, Xenserver installs but I do not see the drive after installation. dell perc h310 mini blade 6gb/s sas eight port pcie gen2 poweredge raid controller for dell poweredge m520 / m620 / m820 - 8 port sata pci-e 2.0 supported. They have been upgraded to the latest firmware naturally and DELL. Then follow up with the CPLD firmware that you manually download from support. Now when I try to install Xenserver 7, I cannot see the drive in the installation. Now when I have Windows installed, the drive shows up and is accessible. At boot, the RAID BIOS is showing and I created a RAID 5 drive. ![]() I bought a second hand Dell PERC H310 controller which I updated to the latest firmware and has 6 HD's attached to it. I'm trying to install XenServer 7 on a desktop pc (i7-4770k).
0 Comments
Leave a Reply. |